Part Number Hot Search : 
UZ7860 A5800847 CPD48 BT2222A HA5023 CAT4026 MAX66020 5320PI
Product Description
Full Text Search
 

To Download AOZ8025 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  rev. 1.1 september 2010 www.aosmd.com page 1 of 8 AOZ8025 6-line emi filter with integrated esd protection general description the AOZ8025 is a 6-line device integrating emi filtering with esd protection for each line. it is designed to suppress unwanted emi/rfi signals and provide electrostatic discharge (esd) protection in portable electronic equipment. this st ate-of-the-art device utilizes aos leading edge trench vertical structure [tvs] 2 ? technology for superior clamping performance and filter attenuation over the full operating display range. the AOZ8025 has been optimized for protection of color lcd displays and ccd camera lin es in cellular phones and other portable consumer electronic devices. the AOZ8025 consists of six identical circuits comprised of tvs diodes for esd protection, and a resistor?capacitor network for emi/rfi filtering. a series resistor value of 100 ? and a capacitance value of 9pf are used to achieve -20db minimum attenuation from 1.0ghz to 3.0ghz. the tvs diodes provide effective suppression of esd voltages in excess of 20kv (contact discharge) and 20kv (air discharge). this exceeds iec 61000-4-2, level 4 esd immunity test. the AOZ8025 comes in an rohs compliant, 3.0mm x 1.35mm dfn package and is rated over a -40c to +85c ambient temperature range. features z 6 lines for emi filterin g and esd protection: ? exceeds iec 61000-4-2, level 4 (esd) immunity test ? 20kv (contact discharge) and 20kv (air discharge) z trench vertical structure [tvs] 2 ? based technology used to achieve excellent esd clamping and filter performance over the full operating display range z filter performance: -20db at tenuation from 1.0ghz to 3.0ghz z low operating voltage: 5.0v z capacitance stability over wide range of voltages and temperatures z dfn package: 3.0mm x1.35mm z pb-free device applications z emi filtering and esd protection for data lines z lcd displays, camera in terface, i/o interface z portable handheld devices, cell phones, pda phones electrical schematic figure 1. ch1 9pf 9pf 100 9pf 9pf 100 9pf 9pf 100 d0 ch2 d1 ch6 d5 lcd/camera module
AOZ8025 rev. 1.1 september 2010 www.aosmd.com page 2 of 8 ordering information aos green products use reduced levels of halogens, and are also rohs compliant. please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information. pin configuration pin description part number ambient temperature range package environmental AOZ8025di -40c to +85 c dfn-12 rohs compliant green product dfn-12 (bottom view) 12 11 10 9 8 7 1 2 3 4 5 6 exposed pad (gnd) 112 211 310 49 58 67 top view pin number pin name pin function 1,12 ch 1 channel 1 connections 2, 11 ch 2 channel 2 connections 3, 10 ch 3 channel 3 connections 4, 9 ch 4 channel 4 connections 5, 8 ch 5 channel 5 connections 6, 7 ch 6 channel 6 connections exposed pad gnd common ground connection
AOZ8025 rev. 1.1 september 2010 www.aosmd.com page 3 of 8 absolute maximum ratings exceeding the absolute maximum ratings may damage the device. notes: 1. iec 61000-4-2 discharge with c discharge = 150pf, r discharge = 330 ? . 2. human body discharge per mil-std-883, method 3015 c discharge = 100pf, r discharge = 1.5k ? . electrical characteristics t a = 25c unless otherwise specified. notes: 3. the working peak reverse voltage, v rwm , should be equal to or greater than the dc or continuous peak operating voltage level. 4. v br is measured at the pulse test current i t . 5. measurements performed using a 100ns transmission line pulse (tlp) system. 6. total capacitance is equal to 2 x c ch . 7. measured at 25c, v r = 2.5v, f = 1.0mhz. 8. guaranteed by design. parameter rating storage temperature (t s ) -65c to +150c esd rating per iec61000-4-2, contact (1) 20kv esd rating per iec61000-4-2, air (1) 20kv esd rating per human body model (2) 30kv symbol parameter conditions min. typ. max. units v rwm reverse working voltage (3) 5.0 v v br reverse breakdown voltage i t = 1ma (4) 678v i r reverse leakage current v rwm = 3.3v 0.1 a v cl signal clamp voltage i load = 1a, positive clamp (5)(8) i load = 1a, negative clamp (5)(8) 7.0 -3.0 v i load = 5a, positive clamp (5)(8) i load = 5a, negative clamp (5)(8) 8.0 -8.0 i load = 12a, positive clamp (5)(8) i load = 12a, negative clamp (5)(8) 10.0 -10.0 r ch total series resistance i r = 20ma 90 100 110 ? c ch channel capacitance input to ground (6)(7)(8) 8910pf f c cut-off frequency measured with 50 ? source and 50 ? load termination 250 mhz attenuation from 1.0ghz to 3.0ghz v r = 0v measured with 50 ? source and 50 ? load termination -20 db
rev. 1.1 september 2010 www.aosmd.com page 4 of 8 AOZ8025 typical performance characteristics -45 -25 -5 5 25 45 65 85 frequency (mhz) peak pulse current, ipp (a) analog crosstalk 0 -20 -40 -60 -80 -100 1 10 100 1000 10000 s21 (db) clamping voltage vs. peak pulse current clamping voltage, vcl (v) insertion loss characteristics -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 1 10 100 1000 10000 frequency (mhz) s21 (db) 6 7 8 9 10 11 024681012 temparature (c) typical resistance vs. temperature resistance () 110 105 100 95 90 forward current (a) forward voltage vs. forward current forward voltage (v) 2 4 6 8 10 12 02 46 81012
rev. 1.1 september 2010 www.aosmd.com page 5 of 8 AOZ8025 package dimensions, dfn 3.0 x 1.35, 12l a b c l c l d pin 1 marking d1 f e1 e b l pin 1 id (c0.2x45 ) e a a3 a1 12 7 8 9 10 11 12 654321 1 0.10 c 0.15 c 0.08 c 0.15 c 2.20 0.20 0.20 1.10 0.35 0.30 0.50 0.25 unit: mm notes: 1. all dimensions are in millimeters. angles is degree. 2. coplanarity applies to the exposed pad as well as the terminals. coplanarity shall not exceed 0.08mm. 3. warpage shall not exceed 0.10mm. 4. package length/package width are not considered as special characteristic. 5. refer jedec mo-229. 6. marking is for package orientation reference only. symbols a a1 a3 b d d1 e e1 e l f dimensions in millimeters recommended land pattern side view top view bottom view min. 0.45 0.00 0.20 2.90 2.10 1.25 0.20 0.20 nom. 0.50 0.02 0.152 ref 0.25 3.00 2.20 1.35 0.30 0.50 bsc 0.30 0.20 ref max. 0.55 0.05 0.30 3.10 2.30 1.45 0.40 0.40 symbols a a1 a3 b d d1 e e1 e l f dimensions in inches min. 0.018 0.000 0.008 0.114 0.083 0.049 0.008 0.008 nom. 0.020 0.001 0.006 ref 0.010 0.118 0.087 0.053 0.012 0.020 bsc 0.012 0.008 ref max. 0.022 0.002 0.012 0.122 0.091 0.057 0.016 0.016 c
rev. 1.1 september 2010 www.aosmd.com page 6 of 8 AOZ8025 tape and dimensions , dfn 3.0 x 1.35, 12l carrier tape reel leader / trailer & orientation a0 1.60 0.10 package dfn 3x1.35 b0 3.25 0.10 k0 0.80 0.10 d0 ?1.5 +0.1/-0.0 d1 ?1.00 min. e 8.0 +0.3/-0.1 e1 1.75 0.10 e2 3.50 0.05 p0 4.00 0.10 p1 4.00 0.10 p2 2.00 0.05 t 0.30 0.05 a-a a a k0 p1 p2 d1 e1 e e2 d0 p0 a0 t r0.25 typ. b0 unit: mm feeding direction tape size 8mm reel size ?178 m ?178.0 1.0 n ?60.0 1.0 m w1 s k h n w trailer tape 300mm min. or 75 empty pockets components tape orientation in pocket leader tape 500mm min. or 125 empty pockets w 11.80 +0.5 w1 9.0 0.5 h ?13.0 +0.5/-0.2 s 2.40 0.10 k 10.25 0.2 g ?9.8 r g r r0.20 max.
rev. 1.1 september 2010 www.aosmd.com page 7 of 8 AOZ8025 package marking 32v assembly location code week & year code part number code underscore denotes green product AOZ8025di (dfn-12)
rev. 1.1 september 2010 www.aosmd.com page 8 of 8 AOZ8025 revision history revision revised item rev. 1.0 initial release as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provid ed in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. alpha & omega semiconductor reserves the right to make changes to this data sheet at any time without notice. life support policy alpha & omega semiconductor products ar e not authorized for use as critical components in life supp ort devices or systems.


▲Up To Search▲   

 
Price & Availability of AOZ8025

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X